Ford Focus 2012-2018 Aluminum Radiator - Replacement Part for 2.0L Models

 

1pc Radiator For 2012-2018 Ford Focus S SE SEL Titanium Trend Sport Electric 2.0L CU13219

 

 

 

Specifications

 

 

 

 

Length(cm): 90.0, width(cm): 13.0, height(cm): 50.0

 

 

 

Weight(kg): 3.5

 

 

Material: Plastic Aluminium

 

 

Color: Silver

 

 

Placement on Vehicle: Front

 

 

Core Material: Aluminium

 

 

Tank Material: Plastic

 

 

Bottom Header: 1.39" x 14.7

 

 

Core Height (IN): 14.09

 

 

Core Length (IN): 26.42

 

 

Core Thickness (IN): 0.63

 

 

Inlet Diameter (IN): 1.32

 

 

Outlet Diameter (IN): 1.32

 

 

Top Header: 1.39" x 14.7

 

 

Interchange Part Numbers

 

 

CU13219.CU13219

 

 

CV6Z8005A

 

 

FO3010301

 

 

Q13219

 

 

13219

 

 

CSF3595

 

 

RAD13219

 

 

RK1694

 

 

TYC13219

 

 

Fitment

 

 

2012 - 2018 Ford Focus ELECTRIC Models
2012 - 2018 Ford Focus S 2.0L Models
2012 - 2018 Ford Focus SE 2.0L Models
2012 - 2018 Ford Focus SEL 2.0L Models
2012 - 2018 Ford Focus Titanium 2.0L Models
2014 Ford Focus Ambiente & Trend 2.0L Models

 

 

Features

 

 

Built to strict quality control standards 100% factory tested

 

 

ISO9001
IATF 16949
EAC

 

 

Easy Installation，100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards

 

 

Mechanically tested prior to leaving the factory ensures optimal performance and enhanced durability.

 

 

Perfect match for the original car.

 

 

The Core was made from high quality Aluminum.Effective heat dissipation.

 

 

Good sealing.

 

 

Direct Replacement, easy to be installed

 

 

Attention

 

 

1. The radiator cap that has not passed the test can’t release the pressure when it reaches the pressure value.
2. The damaged thermostat is unable to carry out a large cycle, resulting in a continuous increase in the radiator pressure.
3. The radiator fan does not turn, resulting in high temperature in the water tank.
4. Drain the air from the cooling system. Refer to the user manual or repair manual.
5. Please refer to owner's manual to add coolant.
6. Do not open the hood until the steam has subsided. The engine compartment may be very hot, causing serious injuries such as burns.
7. Please stop the vehicle immediately, when “ENGINE OVERHEAT/High Temperature” shows on the dashboard or steam comes out from under the hood.
8. Keep hands and clothing (especially a tie, a scarf) away from the fans and belts. Failure to do so may cause the hands or clothing to be caught, resulting in serious injuries.
9. Do not loosen the radiator cap while the engine and radiator are hot. Serious injuries, such as burns, may result from hot coolant and steam released under pressure.

 

 

Note

 

 

1.It will be better if you can check with that above chart to make sure if this radiator will fit your vehicle.
2. The radiator cap that has not passed the test can't release the pressure when it reach the pressure value.
3. The damaged thermostat is unable to carry out a large cycle, resulting in a continuous increase in the radiator pressure.
4. The radiator fan does nont turm, resulting in highh temperature in the water tank.
5. After loading the product on your vehicle and adding the coolant, tighten the rotary cover and leave your vehicle idling for 10-20 minutes. After completely cooling the coolant, open the cover and fill the product with coolant. Please make sure there is no gas in the product.
6. Before you start up your vehicle, please make sure there is coolant in the radiator.